Step 1 - buy some pergola brackets from bunnings,costing 4 x 60c = $2.40
Glue two together back to back with epoxy glue. Then drill some mounting holes in the channel shaped brackets, they are counter sunk to clear the tyre.
I had some chain off-cuts which I bolted to the mudguard. You can see above where the holes will go to bolt the chain to the channel shaped brackets.
You can see here it is all bolted up in the correct position.
Now all I had to do was trim off the brackets so it looks nice and neat. And we are done.
No comments:
Post a Comment